Careers
Join us and turn your career aspirations into achievements.
Structural Engineer
CV Designers d/b/a CV Engineering (Pittsburgh, PA) seeks Structural Engineer to engage in structural calculations and develop designs in conformance with codes & standards.
Req Bachelor’s degree in Civil Engineering + 7 years exp in Civil or Structural engineering in heavy industry environment.
Must have 6 yrs exp with STAAD Pro, 5 yrs exp with calculating/designing concrete structures, steel structures and foundations; and must have Prof Engineering Certification in any state within the US, as well as NCEES records account.
Contact Info:
Reference Job Code: SE042022
Senior Designer – Civil/Structural
CV Engineering is seeking a Civil/Structural Designer for our Pittsburgh, Pennsylvania office.
The Senior Designer shall be responsible for performing the design work Independently based on project requirements and engineering designs. A self-starter, attention to detail, willingness to learn, and diligent to complete the assignments on time. This position requires CAD knowledge and experience.
The successful candidate shall have the following specific responsibilities:
Conceptualize and prepare plans, layouts, sections, details, and bills of materials to accurately convey construction or fabrication requirements.
Develop designs consistent with good practices, client requirements, and conformance to codes and standards, and coordinate with engineers and other designers for carrying out the design work, and to meet the schedules of the deliverables.
Review project scope and vendor information and assist in design planning.
Coordinate with associates in other departments as required.
Identify and resolve any potential conflicts, problems, changes or deviations in designs.
Perform self-review of all the design deliverables prepared for accuracy and constructability.
Adherence to the department’s design standards and assist others to ensure compliance in the designs and updating them as required.
Able to communicate clearing and articulately, verbally and in writing.
REQUIREMENTS:
Minimum 7-10 years’ experience in civil and structural designs of buildings and equipment foundations (spread, mat, and pile); structural steel for mill buildings, auxiliary buildings, equipment support structures, and operating platforms, masonry buildings; site layouts, road and railroad layouts and designs; storm drainage/retainage, erosion and sediment control plans.
Experience with heavy industrial facilities.
Knowledge and experience of REVIT is required. Experience with CIVIL 3D is a plus.
Associate degree in Civil Engineering or Related Field is preferred.
Familiarity with Microsoft Office (Word, Excel, PowerPoint, Outlook).
Contact Info:
Reference Job Code: SE042022
Senior Designer – Piping
CV Engineering is seeking a Senior Piping Designer for our Pittsburgh, Pennsylvania office. The candidate must have experience in heavy industrial facility projects. Design experience in the steel industry is a plus.
The successful candidate shall have the following specific responsibilities:
Must be capable of generating piping drawings from vendor drawings, flow diagrams and P&ID’s.
Capable of utilizing REVIT software to prepare piping layouts and detail drawings with sufficient detail for a contractor to install.
Must be familiar with piping specifications and codes.
Able to complete project documents in a timely matter to meet project schedules.
Capable of checking drawings based on vendor information.
Capable of directing others in the department to delegate work required in a clear and precise manner.
Able to communicate with Department Manager, Project Managers, and other discipline designers to gather information required to complete the design as per client and vendor documentation.
Must be able to read and understand the “As-Sold” specification for the project and provide all necessary drawings required for construction.
Communicate with other disciplines to alleviate any interferences or design issues.
Make any necessary changes or revisions to drawings as required or requested by their supervisor.
Capable of designing pipe supports per codes and standards.
Must be able to follow directions and company standards and procedures.
Willing to perform any duties as required by the Department Manager.
Able to convey to their Department Manager any project requirements, status of project and schedule as requested.
Capable of clarifying any field issues that may come up pertaining to the drawings and design.
Capable of working on their own or as part of a team.
Must be self-motivated and responsible to get the project completed correctly and on budget.
REQUIREMENTS:
Must have a 2-year technical degree from an accredited college or technical school.
Proficient in REVIT is required, Experience in PLANT 3D design software is a plus.
Minimum 10 years experience in piping design in heavy industrial facilities.
Experience in Microsoft Office is required.
HVAC experience is a plus
Must be familiar with all piping codes and construction techniques.
Contact Info:
Reference Job Code: SE042022
Designer - Piping
CV Engineering is seeking a Piping Designer for our Pittsburgh, Pennsylvania office. The candidate must have experience in heavy industrial facility projects. Design experience in the steel industry is a plus.
The successful candidate shall have the following specific responsibilities:
Capable of utilizing REVIT software to prepare piping layouts and detail drawings with sufficient detail for a contractor to install.
Familiar with good engineering design practices in piping including drawing types, i.e. plans, sections, details, Flow Diagrams and P&ID’s
Must be familiar with piping specifications and codes.
Able to complete project documents in a timely matter to meet project schedules.
Capable of checking drawings based on vendor information.
Able to communicate with Department Manager, Project Managers, and other discipline designers to gather information required to complete the design as per client and vendor documentation.
Communicate with other disciplines to alleviate any interferences or design issues.
Make any necessary changes or revisions to drawings and required or requested by their supervisor.
Capable of designing pipe supports per codes and standards.
Must be able to follow directions and company standards and procedures.
Willing to perform any duties as required by the Department Manager or Management.
Able to convey to their Department Manager any project requirements, status of project and schedule as requested.
Capable of working on their own or as part of a team.
May be required to direct others in the department.
Must be self-motivated and responsible to get the project completed correctly and on budget.
REQUIREMENTS:
Must have a 2-year technical degree from an accredited college or technical school.
Proficient in REVIT is required.
Minimum 5 years experience in piping design in heavy industrial facilities.
Experience in Microsoft Office is required.
HVAC experience is a plus.
Must be familiar with all piping codes and construction techniques.
Contact Info:
Reference Job Code: SE042022
Mechanical Engineer
CV Engineering is seeking a Mechanical Engineer for our Pittsburgh, Pennsylvania office. The Engineer shall provide engineering design and details, and shall work in conjunction with Project Managers, and other team members for successful completions of mechanical design and
engineering from commercial and industrial projects.
The successful candidate shall have the following specific responsibilities:
Perform analysis and calculations as required for sizing of mechanical equipment and pipping systems in accordance with the project requirements and all applicable codes and standards.
Provide technical and design guidance to the designers in preparation of construction drawings (equipment layouts, plans, cross sections, details, flow diagrams, P&IDs, bills of material, etc.).
Assist Department Manager in preparation of procurement and construction specifications, bid evaluation.
Review project scope and vendor information and assist Department manager to establish design criteria and guidelines.
Coordinate with other departments, as required.
Coordinate with vendors, as required.
Identify and resolve any potential conflicts, problems, changes or deviations in designs and engineering.
Review, monitor, and approve technical quality of the work performed in the department.
Perform site visits, as required.
Review department design standards and assist Department Manager to ensure compliance within the department and updating them as required.
REQUIREMENTS:
Minimum 5-10 years of experience in mechanical design engineering with emphasis on piping systems (water, sanitary, hydraulics, lubrication, gases, steam, etc.), and HVAC.
Experience should include heavy industrial facilities.
Bachelor’s degree in Mechanical Engineering or related field.
P.E. preferred.
Experience with AutoCAD.
Familiarity with Microsoft Office (Word, Excel, PowerPoint, Outlook).
Contact Info:
Reference Job Code: SE042022
Electrical Engineer
CV Engineering is seeking an Electrical Engineer for our Pittsburgh, Pennsylvania office. The
Engineer shall provide engineering design and details and shall work in conjunction with Project Managers and other team members for successful completion of electrical design and engineering for commercial and industrial projects.
The successful candidate shall have the following specific responsibilities:
Perform analysis and calculations as required for design and engineering of power distribution, lighting, grounding, etc., in accordance with the project requirements and applicable codes and standards.
Perform arc flash, short circuit and coordination studies, as required.
Provide technical and design guidance to the designers in preparation of construction deliverables.
Assist Electrical Department Manager in preparation of procurement and construction specifications, and bid evaluation.
Review project scope and vendor information. Assist Department Manager to establish design criteria and guidelines.
Coordinate with other departments, as required.
Coordinate with vendors, as required.
Identify and resolve any potential conflicts, problems, changes or deviations in designs and engineering.
Perform site visits, as required.
Review, monitor, and approve quality of the work performed by the designers of the department.
Review department design standards and assist Department Manager to ensure compliance within the department and updating them as required.
REQUIREMENTS:
Minimum 5-10 years of experience in electrical design engineering with emphasis on power distribution, substations, arc flash/short circuit coordination studies, conduit, tray sizing, cable sizing, and help designers to route the raceways, controls, lighting, grounding, and cable and conduit schedules.
Experience should include heavy industrial facilities.
Bachelor’s degree in Electrical Engineering.
P.E. preferred.
Experience with E-tap.
Experience with AutoCAD or REVIT.
Familiarity with Microsoft Office (Word, Excel, Access, PowerPoint, Outlook).
Contact Info:
Reference Job Code: SE042022
Senior Designer – Electrical
CV Engineering is seeking a Senior Electrical Designer with electrical system design experience on industrial facility, for our Pittsburgh, PA office. Design experience on steel facilities is considered a significant plus.
The successful candidate shall have the following specific responsibilities:
Utilize REVIT software to prepare 3D and 2D layout and design drawings which meet company and industry standards and codes.
Knowledge of Electrical design practices including drawings, specifications, codes, building materials, and construction techniques.
Prepares CAD electrical design drawings such as: single line diagrams; power, lighting, grounding, and other systems plans; electrical area plans; electrical equipment arrangement plans; cable tray layout plans and sections; conduit and cable schedules; motor control schematics.
Applies standard drafting/design principles to complete assignments. Ensure compliance with company and client policies and applicable standards and codes such as ANSI, NEMA, NEC, IEEE, IEC, NFPA etc.
Makes required changes, additions, and/or revisions, as directed by immediate supervisor.
Performs other responsibilities associated with this position as may be appropriate.
Prepares typical electrical databases/spreadsheets such as: motor and electrical load lists; panel schedules; bills of materials
Assists the Department Manager in maintaining the project design schedule and budget.
Confers and coordinates with the Electrical Engineers regarding any information required for completion of the design.
Interface with project management and project engineers during the design, execution and startup phase of projects
Confers and coordinates with other disciplines to assure compliance with design requirements, company standards and procedures, industry codes and standards, and client criteria.
As a Senior Designer may direct, guide, and check the work of a team of CAD designers and CAD drafters on a project.
REQUIREMENTS:
Minimum 2-year technical degree from an accredited program. Electrical systems / basic electricity coursework included.
Proficiency with REVIT is required.
Minimum 8-10 years relevant experience in an electrical design engineering and in industrial environment
Electrical power system design experience for industrial facilities.
Proficiency in utilizing Microsoft Office products and other computer software used to complete design assignments.
Knowledge of Electrical design practices including drawings, specifications, codes, building materials, and construction techniques.
Contact Info:
Reference Job Code: SE042022
Designer - Electrical
CV Engineering is seeking an Electrical Designer with electrical system design experience on industrial facility, for our Pittsburgh, PA office. Design experience on steel facilities is considered a significant plus.
The successful candidate shall have the following specific responsibilities:
Utilize CAD or REVIT software to prepare 3D and 2D layout and design drawings which meet company and industry standards and codes.
Knowledge of Electrical design practices including drawings, specifications, codes, building materials, and construction techniques.
Prepares CAD electrical design drawings such as: single line diagrams; power, lighting, grounding, and other systems plans; electrical area plans; electrical equipment arrangement plans; embedded and expose conduit layouts; cable tray layout plans and sections; conduit, cable and termination schedules.
Applies standard drafting/design principles to complete assignments. Ensure compliance with company and client policies and applicable standards and codes such as ANSI, NEMA, NEC, IEEE, IEC, NFPA etc.
Makes required changes, additions, and/or revisions, as directed by immediate supervisor.
Performs other responsibilities associated with this position as may be appropriate.
Prepares typical electrical databases/spreadsheets such as: motor and electrical load lists; panel schedules; bills of materials
Confers and coordinates with the Electrical Engineers regarding any information required for completion of the design.
Confers and coordinates with other disciplines to assure compliance with design requirements.
REQUIREMENTS:
Minimum 2-year technical degree from an accredited program. Electrical systems / basic electricity coursework included.
Minimum 5-6 years relevant experience in a construction engineering design.
Proficiency in utilizing Microsoft Office products and other computer software used to complete design assignments
Proficiency with AutoCAD is required. Knowledge of REVIT design software is a plus.
Contact Info:
Reference Job Code: SE042022
Project Manager
CV Engineering, based in Pittsburgh, Pennsylvania is a multi-disciplinary Design Engineering, Project Management, and Consulting Company providing quality design, steel detailing, engineering, and project management services to our clients worldwide. The Project Manager is responsible for leading the project team through the process while ensuring that safety, quality, schedule, cost, and customer satisfaction objectives are met. The Project Manager will be the primary point of contact for our client and the project team and responsible for communicating the status of their projects. The Project Manager will report to and work with the Senior Project Manager.
Duties/Responsibilities:
Good communication skills to coordinate between the Client, Vendor, and internal project team.
Knowledge of reviewing the project requirements and coordinating with the internal project team.
Knowledge of reviewing the project schedule and coordinating the deliverables with the client and internal project team.
Monitor and report project details to the project team, including progress, risks, and opportunities in a timely manner.
Follow up with the client and internal project team on any open RFI’s.
Preparing Monthly progress reports.
Attend on-site meetings with clients and vendors as required.
Requirements:
Bachelor’s degree.
Proven experience as a project manager, preferably in a similar industry or field. (5+ years’ experience in project management required).
PMP certification is required.
Strong leadership and team management skills.
Excellent communication and interpersonal skills.
Proficiency in project management methodologies and tools.
Attention to detail and strong organizational skills.
Ability to adapt to changing priorities and work under pressure.
Contact Info:
Reference Job Code: SE042022
Project Scheduler
CV Engineering, based in Pittsburgh, Pennsylvania is a multi-disciplinary Design Engineering, Project Management, and Consulting Company providing quality design, steel detailing, engineering, and project management services to our clients worldwide. The Project Scheduler shall be responsible for planning and preparing engineering and construction schedules based on project scope and requirements. Diligent to complete the assignments on time. This position requires MS Project knowledge and experience.
Duties/Responsibilities:
Very good interpersonal, written, and verbal communication skills.
Work closely with Project Managers to develop and maintain detailed schedules of projects using MS Project.
Review project scope for identifying milestones, decision points, predecessor, and successor activities.
Integrate multiple schedules into a Master Project Schedule.
Develop and maintain schedule reports, performance variations, and to support cost/schedule integration.
Updating the schedules as required per project needs.
Prepare charts (graphs) for earned value and project value.
Prepare progress reports as needed.
Troubleshoot and monitor potential scheduling problems between equipment vendors, construction engineering, and construction.
Participate in schedule review meetings.
Experience:
Minimum 5 – 10 years of experience in scheduling and scheduling techniques using MS Project.
Experience shall include engineering and construction scheduling for large scale industrial facilities.
Qualifications:
Bachelor’s degree in construction technology or related field preferred.
Familiarity with Microsoft Office (Word, Excel, Access, PowerPoint, Outlook).
Contact Info:
Reference Job Code: SE042022
Project Coordinator
CV Engineering, based in Pittsburgh, Pennsylvania is a multi-disciplinary Design Engineering, Project Management, and Consulting Company providing quality design, steel detailing, engineering, and project management services to our clients worldwide. The Project Coordinator will coordinate between all the project teams to assure that the project is running according to the existing budget and timeline.
Duties/Responsibilities:
Good communication skills to coordinate between the Client, Vendor, and internal project team.
Knowledge of reviewing the project requirements and coordinating with the internal project team.
Knowledge of reviewing the project schedule and coordinating the deliverables with the client and internal project team.
Monitor and report project details to the project team, including progress, risks, and opportunities in a timely manner.
Follow up with the client and internal project team on any open RFI’s.
Preparing Monthly progress reports.
Attend on-site meetings with clients and vendors as required.
Requirements:
Bachelor’s degree.
5+ years’ experience in project management required.
Strong communication skills.
Working knowledge of project management software.
Job Type: Full-time
Contact Info:
Reference Job Code: SE042022